fluidmaster

toilet won't flush when you press the handle?

Most likely the lever has been corroded over time and caused the chain to detach. Replace
your lever.

PRODUCT SOLUTION



REPLACE YOUR TANK LEVER


LEVEL OF DIFFICULTY

TIME TO INSTALL

EASY 10 MINUTES

TOOLS NEEDED:

PRODUCT NEEDED:


Pliers PLIERS

Fluidmaster 684 Chrome Euro Tank Lever

Fluidmaster 684 Chrome Euro Tank Lever SEE PACKAGING  |  SEE IN-STORE DISPLAY
IF YOU ARE IN THE STORE, THIS ITEM IS LOCATED HERE

ALSO AVAILABLE IN:

Fluidmaster 680 White Tank Lever
SEE PACKAGING
Fluidmaster 680 White Tank Lever
SEE IN-STORE DISPLAY
IF YOU ARE IN THE STORE, THIS ITEM IS LOCATED HERE
Fluidmaster 681 Chrome Tank Lever
SEE PACKAGING
Fluidmaster 681 Chrome Tank Lever
SEE IN-STORE DISPLAY
IF YOU ARE IN THE STORE, THIS ITEM IS LOCATED HERE
Fluidmaster 683 White Euro Tank Lever
SEE PACKAGING
Fluidmaster 683 White Euro Tank Lever
SEE IN-STORE DISPLAY
IF YOU ARE IN THE STORE, THIS ITEM IS LOCATED HERE

INSTALLATION INSTRUCTIONS:

  1. Remove tank lid. Disconnect the flapper chain/linkage from the lever. Unthread nut from old lever. Remove lever from tank.

  2. For standard front-mount tanks go to step 3. For a SIDE OR ANGLE-MOUNT TANK, slowly bend new lever arm to match the shape of the old lever arm. DO NOT BEND ARM QUICKLY OR BACK AND FORTH REPEATEDLY.

  3. Measure length of existing lever arm. If necessary, trim new arm at the cut line that best matches the length of the old arm (hacksaw recommended for best results).

  4. Slide arm through tank hole until handle shank fits snugly. Slip lock nut over lever (flat side facing handle). Start nut on threads (reverse thread). DO NOT TIGHTEN FULLY.

  5. Connect flapper chain/linkage to arm hole that provides the best lift. Chain should have slight slack when flapper is in the closed position. Check lift action for proper flush. Tighten lock nut. DO NOT OVERTIGHTEN; overtightening may crack tank.




© 2011 Fluidmaster, Inc. All rights reserved. This document is not a substitute for the product instructions, which may be found at www.fluidmaster.com. Fluidmaster, Inc. shall not be liable for any damages resulting from failure to install or maintain the product in accordance with the product instructions, from abuse or misuse of the product, from use of non-Fluidmaster, Inc. parts, or from overtightening. Do not use in-tank drop-in toilet bowl cleaners containing bleach or chlorine.